T20 Standard EKE Jointed Timing Belt

Manufactured by: EKE

T20
Polyurethane, steel reinforced, extruded endless
Standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform

Important Notes:

Jointed Belts are half the strength of a EKE belt and are only
suitable for conveying or very light power transmission applications.

These belts are made to order and as such are none returnable.

How to order your T20 Jointed belt.

Enter the width in mm of belting required.
Enter the length of belting in mm.
Examples:
1.780 metres = 1780 mm
2.600 metres = 2600 mm
Select Nylon Tooth Covering if required.
Options are:
PAZ , PAR , PAZ-PAR
Select tension cord type required.

	Type	T20
	z_min	15
	d_min	120

	Type	T20
	z_min	25
	d_min	120

Tension member loadings
allowable tensile load by belt width

Belt width	b [mm]	25	32	50	75	100	150
Tension member loadings	F_adm [N]	1750	2250	3500	5250	7000	10000
Belt weight	[kg/m]	0.184	0.245	0.368	0.552	0.736	1.095

T20 Standard EKE Jointed Timing Belt

Important Notes: Jointed Belts are half the strength of a EKE belt and are onlysuitable for conveying or very light power transmission applications. These belts are made to order and as such are none returnable.

How to order your T20 Jointed belt.

Important Notes:

Jointed Belts are half the strength of a EKE belt and are only
suitable for conveying or very light power transmission applications.

These belts are made to order and as such are none returnable.