T10 Standard EKE Jointed Timing Belt

Manufactured by: EKE

T10
Polyurethane, steel reinforced, extruded endless
Standard T Profile to DIN 7721 in metric pitch with trapezoidal toothform

Important Notes:

Jointed Belts are half the strength of a EKE belt and are only
suitable for conveying or very light power transmission applications.

These belts are made to order and as such are none returnable.

How to order your T10 Jointed belt.

Enter the width in mm of belting required.
Enter the length of belting in mm.
Examples:
0.780 metres = 780 mm
2.590 metres = 2590 mm
Select Nylon Tooth Covering if required.
Options are:
PAZ , PAR , PAZ-PAR
Select tension cord type required.

Type	T10	T10-E
z_min	12	10
d_min	60	50

Type	T10	T10-E
z_min	20	15
d_min	60	50

Tension member loadings
allowable tensile load by belt width

Belt width	b [mm]	16	25	32	50	75	100	150
Tension member loadings	F_adm [N]	700	1100	1400	2200	3300	4400	6600
Belt weight	[kg/m]	0.073	0.114	0.145	0.227	0.341	0.454	0.681

T10 Standard EKE Jointed Timing Belt

Important Notes: Jointed Belts are half the strength of a EKE belt and are onlysuitable for conveying or very light power transmission applications. These belts are made to order and as such are none returnable.

How to order your T10 Jointed belt.

Important Notes:

Jointed Belts are half the strength of a EKE belt and are only
suitable for conveying or very light power transmission applications.

These belts are made to order and as such are none returnable.